CS+ Code Generator for RX
The product name of CubeSuite+, an integrated development environment from Renesas,
has been changed to "CS+" from V. 3.00.00, which was released on October 1, 2014.
Changes from V1.15.00 to V1.16.00 (Jul. 20, 2018)
1. Problem Fixed
(a) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No. R20TS0273EJ0100, have been fixed:
1. Initialization of Port Direction Register (PDR) of RX130
Applicable MCUs: RX130 Group (64-pin, 48-pin)
64-pin package
R5F51303AxFK, R5F51303AxFM, R5F51305AxFK, R5F51305AxFM,
R5F51306AxFK, R5F51306AxFM, R5F51307AxFK, R5F51307AxFM,
R5F51308AxFK, R5F51308AxFM
48-pin package
R5F51303AxFL, R5F51303AxNE, R5F51305AxFL, R5F51305AxNE,
R5F51306AxFL, R5F51306AxNE, R5F51307AxFL, R5F51307AxNE,
R5F51308AxFL, R5F51308AxNE
For details, see the Web page at:
https://www.renesas.com/search/keyword-search.html#genre=document&q=r20ts0273
(b) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.R20TS0314EJ0100,have been fixed:
1. Using the Voltage Detection Circuits
Applicable MCUs: RX110, RX111, RX113, RX130, RX230, RX231, RX23T, and RX24T groups
For details, see the Web page at:
https://www.renesas.com/search/keyword-search.html#genre=document&q=r20ts0314
Changes from V1.14.00 to V1.15.00 (Jan. 22, 2018)
1. Problem Fixed
(a) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No. R20TS0161EJ0101, have been fixed:
1. Prohibition of reading from and writing to registers protected from programming by mistake in multi-function
timer pulse unit 2 (MTU2) and 3 (MTU3)
For details, see the Web page at:
https://www.renesas.com/search/keyword-search.html#genre=document&q=r20ts0161
(b) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.R20TS0197EJ0101,have been fixed:
1. When using the I2C bus interface in slave mode
For details, see the Web page at:
https://www.renesas.com/search/keyword-search.html#genre=document&q=r20ts0197
Changes from V1.13.00 to V1.14.00 (Jul. 20, 2017)
1. Problem Fixed
(a) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.R20TS0140EJ0100,
have been fixed:
1. Port Direction Register (PDR) Settings
(applicable products: RX230 and RX231 groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance-tool-rx-1
(b) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.R20TS0161EJ0101,
have been fixed:
1. Prohibition of Reading from and Writing to Registers Protected from Programming by Mistake
in Multi-function Timer Pulse Unit 2 (MTU2) and 3 (MTU3)
(applicable products: RX110, RX111, RX113, and RX130 groups
RX230, RX231, RX23T, RX24T, and RX24U groups
RX64M and RX71M groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance-tool-rx-2
(c) Fixed of the note on Port direction register (PDR) settings
The following caution was fixed.
(applicable products: RX230, RX231 groups)
If the port direction register (PDR) contains control bits* for "nonexistent ports",
those control bits must be set to “1” (output port), but code is not generated correctly.
*: The PDR might have been assigned control bits for “nonexistent ports” due to the MCU specifications.
This setting is required for reading the PIDR register.
If the PIDR register will not be read, processing is not affected by the setting described in this note.
Changes from V1.12.00 to V1.13.00 (Apr. 5, 2017)
1. Supported Devices Increased
- RX family: RX24T group
R5F524TEAxFP, R5F524TCAxFP, R5F524TBAxFP
- RX family: RX24U group
R5F524UEAxFB, R5F524UCAxFB, R5F524UBAxFB, R5F524UEAxFP, R5F524UCAxFP, R5F524UBAxFP
2. Modification of the note on CLKOUT setting of RX231
The following caution was fixed.
When establishing "Clock Generator" by RX231 device, "CLKOUT pin setting" isn't indicated.
Therefore setting of the item and release can't be done.
3. Modification of low-speed operating mode and Software Standby Mode of supply current setting
The following caution was fixed.
Notes on Increase of Supply Current in Low Power Modes for RX231 Group (Document No. TN-RX*-A169A/E )
Refer to the Technical Updates on the relevant device for details.
https://www.renesas.com/document/tcu/note-regarding-increase-supply-current-low-power-consumption-mode-rx231-group
Changes from V1.11.00 to V1.12.00 (Jan. 20, 2017)
1. Supported Devices Increased
- RX family: RX24T group
R5F524TAAxFM, R5F524T8AxFM
2. Problem Fixed
In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.R20TS0087EJ0100,
have been fixed:
1. Selection of the MTIOC3 pin for MTU3 in Multi-Function Timer Pulse Unit 3
(applicable products: RX64M and RA71M groups)
2. Low-speed On-chip Oscillator (LOCO) when Low Power Consumption (LPC) is Specified
(applicable products: RX64M, RX65N, RX651 and RA71M groups)
3. Sub-projects of CS+ and the Operation of Multiple e2 studio Projects
(applicable products: All groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance-tool-rx-0
Changes from V1.10.00 to V1.11.00 (Oct. 5, 2016)
1. Supported Devices Increased
- RX65N group
- RX651 group
2. Problem Fixed
In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.R20TS0039EJ0100,
have been fixed:
1. Serial communications interface SCI6
(applicable products: RX231 group (100-pin products) and RX230 group (100-pin products))
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance-tool-rx
Changes from V1.09.00 to V1.10.00 (Apr. 20, 2016)
1. Problem Fixed
(a) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.151101/tn4,
have been fixed:
1. Setting to permit or prohibit suspension of transfer in response to the reception of NACK over the I2C bus interface (RIIC)
(applicable products: RX71M, RX64M, RX23T, RX230, RX231, RX110, RX111, and RX113 groups)
2. Settings for the output of RTCOUT from the real time clock (RTC)
(applicable products: RX110, RX111, and RX113 groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-using-following-toolscs-code-generator-rx-e-studio-code-generator-plug-inap4-coding-assistance
Note: Number 3 is already fixed.
(b) In the updated generator, the following problem, which was reported in RENESAS TOOL NEWS Document No.150216/tn4,
have been fixed:
FIFO embedded Serial Communications Interface SCIFA10
(applicable products: RX71M group (144 or more pins) and RX64M group (144 or more pins))
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-following-tools
Changes from V1.08.00 to V1.09.00 (Dec. 21, 2015)
1. Supported Devices Increased
- RX130 group
| |
48pin |
R5F51303AxFL, R5F51305AxFL, R5F51303AxNE, R5F51305AxNE |
64pin |
R5F51303AxFM, R5F51305AxFM, R5F51303AxFK, R5F51305AxFK |
80pin |
R5F51303AxFN, R5F51305AxFN |
|
|
- RX24T group
| |
80pin |
R5F524T8AxFF, R5F524T8AxFN, R5F524TAAxFF, R5F524TAAxFN |
100pin |
R5F524T8AxFP, R5F524TAAxFP |
|
|
2. Problem Fixed
(a) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.150516/tn1,
have been fixed:
4. 12-bit A/D Converter (S12ADC)
(applicable products: RX64M and RX71M groups)
5. 12-bit D/A Converter (R12DA)
(applicable products: RX64M and RX71M groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-cs-code-generator-rx-0
Note: Numbers 1 to 3 are already fixed.
(b) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No.150716/tn1,
have been fixed:
1. Bus Settings
(applicable products: RX64M and RX71M groups)
2. Code Generated for the Clock Generation Circuit (HOCO Operation)
(applicable products: RX111 and RX113 groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-cs-code-generator-rx-e-studio-code-generator-plug-and-ap4-coding-assistance-tool-rx
(c) In the updated generator, the following problem, which was reported in RENESAS TOOL NEWS Document No.150807/tn3,
have been fixed:
- Complementary PWM mode setting of the MTU
(applicable products: RX230 and RX231 groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-using-following-tools-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance
(d) In the updated generator, the following problem, which was reported in RENESAS TOOL NEWS Document No.150901/tn2,
have been fixed:
- Interrupts when the MTU is set for complementary PWM mode
(applicable products: RX23T group, RX230 and RX231 groups, RX110, RX111, and RX113 groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-using-following-tools-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance-0
(e) In the updated generator, the following problem, which was reported in RENESAS TOOL NEWS Document No.151101/tn4,
have been fixed:
3. Setting of the data transfer controller (DTC)
(applicable products: RX71M, RX64M, RX23T, RX230, RX231, and RX113 groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-using-following-toolscs-code-generator-rx-e-studio-code-generator-plug-inap4-coding-assistance
Note: Numbers 1 and 2 will be fixed in the next version.
(b) In the updated generator, the following problem, which was reported in RENESAS TOOL NEWS Document No.151201/tn3,
have been fixed:
- Using the Multi-Function Pin Controller (MPC) to Select Functions of the PAn Pins
(applicable products: RX113 group)
For details, see the Web page at:
https://www.renesas.com/document/tnn/notes-using-following-tools-cs-code-generator-rx-e-studio-code-generator-plug-ap4-coding-assistance-1
Changes from V1.07.00 to V1.08.00 (Aug. 7, 2015)
1. Supported Devices Increased
- RX230 group
| |
48pin |
R5F52305AxNE, R5F52306AxNE
R5F52305AxFL, R5F52306AxFL |
64pin |
R5F52305AxND, R5F52306AxND
R5F52305AxFM, R5F52306AxFM
R5F52305AxLF, R5F52306AxLF |
100pin |
R5F52305AxLA, R5F52306AxLA
R5F52305AxFP, R5F52306AxFP |
|
|
- RX231 group
| |
48pin |
R5F52315AxNE, R5F52316AxNE, R5F52317AxNE, R5F52318AxNE
R5F52315CxNE, R5F52316CxNE, R5F52317BxNE, R5F52318BxNE
R5F52315AxFL, R5F52316AxFL, R5F52317AxFL, R5F52318AxFL
R5F52315CxFL, R5F52316CxFL, R5F52317BxFL, R5F52318BxFL |
64pin |
R5F52315AxND, R5F52316AxND, R5F52317AxND, R5F52318AxND
R5F52315CxND, R5F52316CxND, R5F52317BxND, R5F52318BxND
R5F52315AxFM, R5F52316AxFM, R5F52317AxFM, R5F52318AxFM
R5F52315CxFM, R5F52316CxFM, R5F52317BxFM, R5F52318BxFM
R5F52315CxLF, R5F52316CxLF |
100pin |
R5F52315AxLA, R5F52316AxLA, R5F52317AxLA, R5F52318AxLA
R5F52315CxLA, R5F52316CxLA, R5F52317BxLA, R5F52318BxLA
R5F52315AxFP, R5F52316AxFP, R5F52317AxFP, R5F52318AxFP
R5F52315CxFP, R5F52316CxFP, R5F52317BxFP, R5F52318BxFP |
|
|
Changes from V1.06.00 to V1.07.00 (Jun. 22, 2015)
1. Supported Devices Increased
- RX23T group
| |
48pin |
R5F523T3AxFL, R5F523T5AxFL |
52pin |
R5F523T3AxFD, R5F523T5AxFD |
64pin |
R5F523T3AxFM, R5F523T5AxFM |
|
|
2. Problem Fixed
(a) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No. 150301/tn2,
have been fixed:
1. Multifunction Timer Pulse Unit 3
(applicable products: RX64M group)
2. Serial Communications Interface
(applicable products: RX111, RX113, RX64M and RX71M groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-cs-code-generator-rx
(b) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No. 150516/tn1,
have been fixed:
1. Code Generated for the Clock Generation Circuit (PLL Circuit Operation)
(applicable products: RX111 and RX113 groups)
2. Bus Settings
(applicable products: RX64M and RX71M groups)
3. 16-bit Timer Pulse Unit (TPUa) and Multifunction Timer Pulse Unit3 (MTU3a)
(applicable products: RX64M and RX71M groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-cs-code-generator-rx-0
Changes from V1.05.00 to V1.06.00 (Apr. 20, 2015)
1. Problem Fixed
(a) In the updated generator, the following problem, which was reported in RENESAS TOOL NEWS Document No. 140816/tn2,
have been fixed:
With setting of the multi-function timer pulse unit (MTU) and 16-bit timer pulse unit (TPU) (target: RX111 and RX64M groups)
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-code-generator-rx-family-managed-cubesuite
(b) In the updated generator, the following problems, which was reported in RENESAS TOOL NEWS Document No. 141216/tn2,
have been fixed:
1. Settings for clocks in the output code
(applicable products: RX64M group)
2. Bus settings
(applicable products: RX64M group)
For details, see the Web page at:
https://www.renesas.com/document/tnn/note-using-code-generator-rx-family-managed-cs
Changes from V1.04.00 to V1.05.00 (Feb. 5, 2015)
1. Supported Devices Increased
- RX71M group
| |
100pin |
R5F571MFDxFP, R5F571MFCxLJ, R5F571MFDxFP, R5F571MFDxLJ
R5F571MGDxFP, R5F571MGDxLJ, R5F571MGCxFP, R5F571MGCxLJ
R5F571MJDxFP, R5F571MJDxLJ, R5F571MJCxFP, R5F571MJCxLJ
R5F571MLDxFP, R5F571MLDxLJ, R5F571MLCxFP, R5F571MLCxLJ
|
144/145pin |
R5F571MFCxFB, R5F571MFCxLK, R5F571MFDxFB, R5F571MFDxLK
R5F571MGCxFB, R5F571MGCxLK, R5F571MGDxFB, R5F571MGDxLK
R5F571MJCxFB, R5F571MJCxLK, R5F571MJDxFB, R5F571MJDxLK
R5F571MLCxFB, R5F571MLCxLK, R5F571MLDxFB, R5F571MLDxLK |
176/177/178pin |
R5F571MFDxFC, R5F571MFDxBG, R5F571MFDxLC
R5F571MFCxFC, R5F571MFCxBG, R5F571MFCxLC
R5F571MGDxFC, R5F571MGDxBG, R5F571MGDxLC
R5F571MGCxFC, R5F571MGCxBG, R5F571MGCxLC
R5F571MJDxFC, R5F571MJDxBG, R5F571MJDxLC
R5F571MJCxFC, R5F571MJCxBG, R5F571MJCxLC
R5F571MLDxFC, R5F571MLDxBG, R5F571MLDxLC
R5F571MLCxFC, R5F571MLCxBG, R5F571MLCxLC |
|
|
Changes from V1.03.00 to V1.04.00 (Dec. 5, 2014)
1. Supported Devices Increased
- RX113 group
| |
64pin |
R5F51135AxLJ, R5F51136AxLJ, R5F51137AxLJ, R5F51138AxLJ |
100pin |
R5F51135AxFP, R5F51136AxFP, R5F51137AxFP, R5F51138AxFP
R5F51135AxFM, R5F51136AxFM, R5F51137AxFM, R5F51138AxFM |
|
|
Changes from V1.02.00 to V1.03.00 (Oct. 1, 2014)
This updating has associated with the updating to CS+ from CubeSuite+, there is no change in the function.
Changes from V1.01.00 to V1.02.00 (Jul. 1, 2014)
1. Supported Devices Increased
- RX64M group
| |
100pin |
R5F564MFCxFP, R5F564MFCxLJ, R5F564MFDxFP, R5F564MFDxLJ
R5F564MGCxFP, R5F564MGCxLJ, R5F564MGDxFP, R5F564MGDxLJ
R5F564MJCxFP, R5F564MJCxLJ, R5F564MJDxFP, R5F564MJDxLJ
R5F564MLCxFP, R5F564MLCxLJ, R5F564MLDxFP, R5F564MLDxLJ |
144/145pin |
R5F564MFCxFB, R5F564MFCxLK, R5F564MFDxFB, R5F564MFDxLK
R5F564MGCxFB, R5F564MGCxLK, R5F564MGDxFB, R5F564MGDxLK
R5F564MJCxFB, R5F564MJCxLK, R5F564MJDxFB, R5F564MJDxLK
R5F564MLCxFB, R5F564MLCxLK, R5F564MLDxFB, R5F564MLDxLK |
176/177pin |
R5F564MFDxFC, R5F564MFDxBG, R5F564MFDxLC, R5F564MFCxFC
R5F564MFCxBG, R5F564MFCxLC, R5F564MGDxFC, R5F564MGDxBG
R5F564MGDxLC, R5F564MGCxFC, R5F564MGCxBG, R5F564MGCxLC
R5F564MJDxFC, R5F564MJDxBG, R5F564MJDxLC, R5F564MJCxFC
R5F564MJCxBG, R5F564MJCxLC, R5F564MLDxFC, R5F564MLDxBG
R5F564MLDxLC, R5F564MLCxFC, R5F564MLCxBG, R5F564MLCxLC |
|
|
Changes from V1.00.00 to V1.01.00 (Mar. 24, 2014)
1. Supported Devices Increased
- RX110 group
| |
36pin |
R5F5110HAxLM, R5F5110JAxLM, R5F51101AxLM, R5F51103AxLM |
40pin |
R5F5110HAxNF, R5F5110JAxNF, R5F51101AxNF, R5F51103AxNF |
48pin |
R5F5110JAxFL, R5F5110JAxNE, R5F51101AxFL, R5F51101AxNE, R5F51103AxFL, R5F51103AxNE, R5F51104AxFL, R5F51104AxNE, R5F51105AxFL, R5F51105AxNE |
64pin |
R5F5110JAxFK, R5F5110JAxFM, R5F5110JAxLF, R5F51101AxFK, R5F51101AxFM, R5F51101AxLF
R5F51103AxFK, R5F51103AxFM, R5F51103AxLF, R5F51104AxFK, R5F51104AxFM, R5F51104AxLF
R5F51105AxFK, R5F51105AxFM, R5F51105AxLF |
|
|
2. Addition of PinView function
PinView function, which displays pin settings for the MCU, has been supported.
For details, see the Release Note at:
https://www.renesas.com/software-tool/cs#document