How to print this page

1. Descriptions of Revision
1.1 Capability Introduced
    The following capability has been introduced:
     - Updating the Memory window periodically during execution of the 
       user program.

1.2 Improvements Made
    The following improvements have been made:
     - The channels of the timer module for the SH-2A core increased 
       from 1 to 2.
     - The channels of the timer module for the SH-4A core increased 
       from 2 to 6.

1.3 Problem Fixed
    The problem reported in RENESAS TOOL NEWS Document No. 090316/tn1 
    ("With setting the clock rate for the peripheral functions," 
    published on March 16, 2009) has been fixed. For details see:
      http://tool-support.renesas.com/eng/toolnews/090316/tn1.htm

2. How to Update Your Product
   Online update is available free of charge. Update yours in either of 
   the following ways:
   (1) Use AutoUpdate Utility. This service is available on and after 
       June 10, 2009.
   (2) Download the update program of the product from:
         http://www.renesas.com/sh_sim_download 
       Then execute it. This site will be opened from June 5, 2009, on. 
       The above URL is that of our global site (in English). 

3. Notices
   (1) This simulator debugger is a component of the C/C++ compiler package 
       for the SuperH RISC engine family. So it is not available alone.
   (2) Only the simulator debugger is updated by the update described in 2.
   (3) The simulator debugger can be updated in the development system 
       where High-performance Embedded Workshop V.4.05.01 resides. So if 
       you have not already installed this IDE, install it in advance.