Table 5.2

Fatal Errors

E0020001

[Message]

Cannot find product list file 'xxxx'.

E0020002

[Message]

Not Support this device 'xxxx'.

E0020003

[Message]

Cannot read file.

E0021001

[Message]

Cannot find product file 'xxxx'.

E0021002

[Message]

Not Support this device 'xxxx'.

E0021003

[Message]

Cannot read file.

E0021004

[Message]

Failed update of Device dependent information.

E0022001

[Message]

Not Support this device 'xxxx'.

E0022002

[Message]

Cannot find terminal information file 'xxxx'.

E0022003

[Message]

Cannot read file.

E0023001

[Message]

Not Support this device 'xxxx'.

E0023002

[Message]

Cannot find device file 'xxxx'.

E0023003

[Message]

Cannot find device extended information file 'xxxx'.

E0023004

[Message]

Cannot read file.

E0023005

[Message]

xxxx isn't a device file.

E0023006

[Message]

V850 microcontroller is not supported.

E0023007

[Message]

78K microcontroller is not supported.

E0023008

[Message]

78K0/78K0S and V850 microcontroller are not supported.

E0023009

[Message]

RL78 Family,78K0R microcontroller is not supported.

E0023010

[Message]

RL78 Family,78K0R and V850 microcontroller are not supported.

E0023011

[Message]

Cannot find CategoryName 'xxxx'.

E0023012

[Message]

V850E2 microcontroller is not supported.

E0023013

[Message]

78K0/78K0S microcontroller is not supported.

E0023014

[Message]

78K0 microcontroller is not supported.

E0023015

[Message]

Duplicate Device dependent information files exist. Delete from Device_custom folder.

Please delete Device dependent information file from Device_custom folder: aaaa bbbb

(Please delete both Device dependent information file and list file in the Device_Custom folder.)

E0023017

[Message]

RX microcontroller is not supported.

E0023018

[Message]

RH850 microcontroller is not supported.

E0024001

[Message]

Not Support this device 'xxxx'.

E0024002

[Message]

Cannot find device extended file 'xxxx'.

E0024003

[Message]

Cannot read file.

E0025001

[Message]

Not Support this device 'xxxx'.

E0025002

[Message]

Cannot find device file 'xxxx'.

E0025003

[Message]

Cannot find terminal information file 'xxxx'.

E0025004

[Message]

Cannot find device extended file 'xxxx'.

E0025005

[Message]

Cannot read file.

E0040100

[Message]

Can not get product information of device dependent information.

E0040101

[Message]

Can not get nickname of device dependent information.

E0040102

[Message]

Illegal version format of QE information file.

E0040103

[Message]

Duplicate QE information files of same version exist.

E0040104

[Message]

QE Information failed to initialize.

E0100000

[Message]

Failed to start the CS+ update manager.

Please install CS+ again.

E0100003

[Message]

Failed to start "xxx".

Failed to read "yyy".

[Action by User]

Reinstall CS+.

If this does not resolve the problem, reinstall after deleting all files in the folder containing file noted in the message.

E0100004

[Message]

Failed to write "xxx".

[Action by User]

Reinstall CS+.

If this does not resolve the problem, reinstall after deleting all files in the folder containing file noted in the message.

E0100005

[Message]

Failed to start "xxx".

[Action by User]

If it occurred in the installer, perform the update again.

If it occurred in an installed tool, reinstall it.

E0100006

[Message]

Failed to restart "xxx".

[Action by User]

Start manually

E0100007

[Message]

The CS+ update manager is not installed.

[Action by User]

Install CS+ update manager.

E0100008

[Message]

Can not start this CS+ update manager because it is moved from its installed folder.

[Action by User]

Start up the CS+ update manager from the [Start] menu.

E0100009

[Message]

Failed to read "xxx"

[Action by User]

Reinstall CS+.

If this does not resolve the problem, reinstall after deleting all files in the folder containing file noted in the message.

E0100010

[Message]

Failed to start "xxx".

Failed to write "yyy".

[Action by User]

Reinstall CS+.

If this does not resolve the problem, reinstall after deleting all files in the folder containing file noted in the message.

E0100014

[Message]

Failed to write temporary file.

[Explanation]

This appears when the user specified the pass which can't write a file in environment variable TEMP, or when more than 65,535 temporary files exist in the folder.

[Action by User]

Make sure that it is possible to write files in the folder specified by the environment variable TMP.

E0100019

[Message]

Failed to read temporary file.

[Explanation]

Temporary files created by the Update Manager may have been deleted or otherwise manipulated by other than the Update Manager.

E0110004

[Message]

Failed to get update information.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0110010

[Message]

Failed to read install information.

Can not get the version of "xxx" for the following reason.

yyy

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0110011

[Message]

Failed to read update condition.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0110012

[Message]

Failed to read update condition.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0110013

[Message]

Failed to read update condition.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111000

[Message]

Failed to read download source.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111001

[Message]

An internal error occurred in Update Manager.

Failed to write downloaded file.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111002

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111003

[Message]

Download source is invalid.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111004

[Message]

Failed to write downloaded file.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111005

[Message]

Failed to write downloaded file.

Aborting the download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111006

[Message]

Failed to write downloaded file.

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111007

[Message]

Failed to write downloaded file "xxx".

Aborting the download.

[Action by User]

Make sure that it is possible to write files in the path specified in the message.

If you cannot identify the cause, please contact your vendor or your Renesas Electronics overseas representative.

E0111008

[Message]

Failed to write downloaded file "xxx".

Aborting the download.

[Action by User]

Make sure that it is possible to write files in the path specified in the message.

If you cannot identify the cause, please contact your vendor or your Renesas Electronics overseas representative.

E0111009

[Message]

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111010

[Message]

The response from the server was not correct.

Please check for updates after a while.

[Explanation]

This appears when there is an error in the update information on the server.

[Action by User]

Please check for updates after a while.

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111011

[Message]

Failed to resume download.

Please retry the operation.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111012

[Message]

Failed to write downloaded file "xxx".

Aborting the download.

[Action by User]

Check the free space of the disk.

When being no problem, make sure that it is possible to write files in the path specified in the message.

If you cannot identify the cause, please contact your vendor or your Renesas Electronics overseas representative.

E0111013

[Message]

Failed to write downloaded file "xxx".

Please retry the operation.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0111100

[Message]

Failed to write internal data.

Aborting the download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111101

[Message]

Failed to write internal data because saving destination is not found.

Aborting the download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111102

[Message]

Failed to write internal data.

Aborting the download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111103

[Message]

Failed to write internal data because denied to write.

Aborting the download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0111104

[Message]

I/O error occurred while downloading a file.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0112000

[Message]

The server returned an error (xxx).

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0112200

[Message]

The server returned an error.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0112300

[Message]

The server returned invalid response.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0112406

[Message]

Failed to authenticate with proxy server at xxx.

[Action by User]

Enter your user name and password in the Proxy Authentication dialog box.

If you are unclear about anything, please contact your network administrator.

E0112503

[Message]

The server is temporary unavailable.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0112996

[Message]

Failed to authenticate with proxy server.

[Action by User]

Enter your user name and password in the Proxy Authentication dialog box.

If you are unclear about anything, please contact your network administrator.

E0112997

[Message]

Failed to authenticate with proxy server at xxx.

Failed to recognize authentication scheme (yyy) that the server requires.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0112998

[Message]

A connection with the server could not be established.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0112999

[Message]

The server returned an error.

Please retry the operation after a while.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113000

[Message]

A connection with the server could not be established.

Cannot find server or DNS error.

[Action by User]

Make sure that you can display Internet sites in Internet Explorer.

Contact your network administrator if you cannot.

If you can display Internet sites, there is probably a temporary issue with the server. Please try again after waiting for a while.

E0113001

[Message]

A connection with the server could not be established.

[Action by User]

Make sure that you can display secure Internet sites (starting with "https://") in Internet Explorer.

Contact your network administrator if you cannot.

If you can display Internet sites, there is probably a temporary issue with the server. Please try again after waiting for a while.

E0113002

[Message]

A complete response was not received from the server.

The server may have a problem.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0113003

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113004

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113005

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113006

[Message]

A connection with the server is untrusted.

A server certificate for secure connection could not be validated.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0113007

[Message]

A secure connection with the server could not be established.

Please retry the operation after a while.

[Action by User]

Make sure that you can display secure Internet sites (starting with "https://") in Internet Explorer.

Contact your network administrator if you cannot.

If you can display Internet sites, there is probably a temporary issue with the server. Please try again after waiting for a while.

E0113008

[Message]

The server response was not a valid.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0113009

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113010

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113011

[Message]

A connection with the proxy server could not be established.

Cannot find server or DNS error.

[Action by User]

Make sure that you can display ordinary and secure Internet sites (sites starting with "https://") in Internet Explorer.

Contact your network administrator if you cannot.

E0113012

[Message]

The server response was not a valid.

Please retry the operation after a while.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0113013

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113014

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113015

[Message]

A connection with the proxy server was denied.

Please contact your network administrator.

[Action by User]

Make sure that you can display ordinary and secure Internet sites (sites starting with "https://") in Internet Explorer.

Contact your network administrator if you cannot.

E0113098

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0113099

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0114000

[Message]

A connection with the server has timed out.

[Action by User]

Make sure that you can display ordinary and secure Internet sites (sites starting with "https://") in Internet Explorer.

Contact your network administrator if you cannot.

If you can, the site may be blocked by a personal firewall or other security software. Allow the Update Manager to conduct http and https communication.

The following executable file must be allowed.

<Installation location>\CS+\UpdateManager.exe

E0115000

[Message]

Download was canceled.

E0115001

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0119999

[Message]

An internal error occurred in Update Manager.

Failed to download.

[Action by User]

Please contact your vendor or your Renesas Electronics overseas representative.

E0120001

[Message]

Failed to download.

xxx

E0120002

[Message]

Download was aborted.

E0120003

[Message]

Because downloading related updates are failed, installation was aborted.

E0120004

[Message]

Installation was aborted.

E0120005

[Message]

Install failure. (Error code:xxx)

E0120006

[Message]

Another program is running an update. Please run the update after the current update is completed.

E0120007

[Message]

Failed to acquire administrative privileges.

[Action by User]

If you specified a user who is not an administrator, perform the action again.

E0120008

[Message]

Because installing related updates are failed, installation was aborted.

E0120009

[Message]

Can not find the installer.

[Action by User]

Perform the update again.

E0120010

[Message]

Downloaded file was broken.

Please retry the operation.

[Action by User]

If this error persists, please contact your vendor or your Renesas Electronics overseas representative.

E0120011

[Message]

Installer is untrusted.

Digital signature could not be validated.

Root certificate store in Windows may be old.

E0130000

[Message]

Please select the object to copy.

E0130001

[Message]

Please select the object to delete.

E0130002

[Message]

Please select the object to restore.

E0130003

[Message]

Failed to delete "xxx".

E0140001

[Message]

This product is not guaranteed on the Windows xxx operating system.

Cannot install this product.

Canceling installation.

[Explanation]

This appears when starting the integrated installer on a non-guaranteed version of Windows.

E0140002

[Message]

Cannot write installation information because user rights are not set to the appropriate level.

Administrator rights are required to install this product.

Canceling installation.

[Explanation]

This appears when started by a user without administrator privileges.

E0140003

[Message]

.NET Framework 4 is not installed.

.NET Framework 4 is required to install this product.

Canceling installation.

[Explanation]

This appears when the integrated installer is started on a host machine without the .NET Framework 4 installed.

E0140005

[Message]

Cannot access file (xxx).

A file needed to install this product may be missing or damaged.

Canceling installation.

[Explanation]

This appears when there are missing components or the information file is corrupt.

E0140008

[Message]

A file necessary for installing this product was not able to be read and/or write.

Canceling installation.

[Explanation]

This appears when the Renesas Electronics sales offices information files could not be copied to the host machine.

E0140009

[Message]

Cannot copy the file (xxx) required for installation of this product.

A file with the same name already exists at the copy destination.

Canceling installation.

[Explanation]

This appears when the Renesas Electronics sales offices information files could not be copied to the host machine.

E0140010

[Message]

Cannot obtain information required for installation.

xxx

[Explanation]

This appears when the information required for installation is not set.

The file may be damaged.

E0140012

[Message]

Cannot access the license agreement file.

A file needed to install this product may be missing or damaged.

Canceling installation.

E0140013

[Message]

Cannot display the license agreement file.

The file may be damaged.

Canceling installation.

E0140014

[Message]

Cannot obtain information about the destination folder of the previous installation.

Canceling installation.

[Explanation]

This appears when there is a file with information about the installation folder from the last install, but the information could not be read.

E0140015

[Message]

The specified installation destination drive does not exist, or is on a network.

Please specify a local disk drive.

[Explanation]

This appears when the installation folder contains specifies a non-existent drive, or invalid characters or a drive that is not a local disc.

E0140016

[Message]

Invalid installation folder.

[Explanation]

This appears when the character that cannot be used as a folder is specified for the folder at the installation destination.

E0140017

[Message]

Not enough free disk space.

Please make enough free space on the installation destination.

[Explanation]

This appears when there is not enough free disc space.

E0140019

[Message]

Installation failed.

Please reboot your computer.

[Explanation]

This appears when some tools failed to install, but the installation was successful, and the system must therefore be restarted.

E0140020

[Message]

Installation failed.

The installation was aborted before finish.

Please reboot your computer.

[Explanation]

This appears when the installation was aborted, and some of the tools from the completed portion (before cancellation) failed to install, but the installation was successful, and the system must therefore be restarted.

E0140021

[Message]

Some installations have failed.

The installations of the specified tools are not completed.

[Explanation]

This appears when there has been a failed installation.

E0140023

[Message]

Installation failed.

The installation was aborted before finish.

[Explanation]

This appears when the installation was aborted, and the installation of the completed portion (before cancelling) failed.

E0140024

[Message]

Could not create a directory necessary for installing this product.

Installation aborted.

[Explanation]

This appears when the folder in which to allocate the linking information for other tools could not be created.

E0140026

[Message]

Could not start xxx.

[Explanation]

This appears when The "Launch Update Manager." check box in the Setup completion Window is checked, and Update Manager failed to start.

Or this appears when you click [Next] in the installation window when installing a required environment, and the integrated installer fails to launch.

E0140027

[Message]

The system may not be properly configured for installation.

Canceling installation.

[Explanation]

This appears when the registry could not be referenced while checking for installed tools.

E0140028

[Message]

"CS+ Utilities" is already installed.

Please remove "CS+ Utilities"

Programs and Features dialog box.

Canceling installation.

[Explanation]

The integrated installer has detected that only "CS+ Utilities" are installed as CS+-related tools.

All CS+-related tools need to be uninstalled in advance if you wish to change the installation folder.

Delete "CS+ Utilities" before starting the installation process.

[Action by User]

Uninstall "CS+ Utilities" before starting up the integrated installer.

E0140030

[Message]

Cannot open the install information file (xxx).

Canceling installation.

[Explanation]

This error appears if the "preparing installation" window could not be displayed when running the self-extracting file for the free tools.

E0140034

[Message]

A file necessary for uninstalling this product was not able to be read and/or write.

Canceling uninstallation.

[Explanation]

This appears when the integrated uninstaller was not able to obtain the information necessary to uninstall the CS+ Utilities.

[Action by User]

To uninstall all CS+ products, manually remove "CS+ Utilities" using the Windows uninstallation functionality.

E0140036

[Message]

Cannot obtain information required for installation.

Canceling installation.

[Explanation]

This appears when the installer is unable to get the required information from the OS, and determines that it is not appropriate to continue with the installation.

E0140038

[Message]

The following product failed in installation.

- xxx

Stop the installation.

[Explanation]

This appears when the installation of a required environment fails.

E0140039

[Message]

The following product failed in installation.

- xxx

The following products are required to reboot Windows to complete the installation.

Please reboot your computer.

- xxx

:

Please install the latest service packs and security updates for this product using Windows Update and Microsoft Update.

Stop the installation.

[Explanation]

This appears when the installation of a required environment fails, but when it's necessary to be a restart by the installation which succeeded.

E0140040

[Message]

The following product failed in installation.

- xxx

The following product succeeded in installation.

- xxx

:

Please install the latest service packs and security updates for this product using Windows Update and Microsoft Update.

Stop the installation.

[Explanation]

This appears when the installation of a required environment fails, but when installation besides that succeeded.

E0140041

[Message]

The following product failed in installation.

- xxx

The following products are required to reboot Windows to complete the installation.

Please reboot your computer.

- xxx

The following product succeeded in installation.

- xxx

Please install the latest service packs and security updates for this product using Windows Update and Microsoft Update.

Stop the installation.

[Explanation]

This appears when the installation of a required environment fails, but when it's necessary to be a restart by the installation which succeeded.

E0172000

[Message]

Getting a license is timed out.

E0172001

[Message]

Command-line option is invalid.

E0172002

[Message]

Failed to load license file.

E0172003

[Message]

Failed to load option file.

xxx

E0172004

[Message]

Failed to load option file.

xxx

E0172005

[Message]

Failed to save option file.

xxx

E0172006

[Message]

Failed to save option file.

xxx

E0172007

[Message]

Failed to load license information.

xxx

E0172008

[Message]

Server address or port settings is invalid.

xxx

E0172009

[Message]

Failed to save license information.

xxx

E0172010

[Message]

Server address or port settings is invalid.

xxx

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

E0172011

[Message]

Failed to receive response from license server.

xxx

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

E0172020

[Message]

Response from license server is invalid.

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

E0172021

[Message]

Response from license server is invalid.

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

E0172022

[Message]

No available license in license server.

E0172023

[Message]

No available license in license server.

But upper level license is available.

E0172024

[Message]

License server respond "invalid server".

[Action by User]

Disable the floating license in the option dialog box and enable it again.

E0172025

[Message]

License server respond "invalid client".

[Action by User]

Disable the floating license in the option dialog box and enable it again.

E0172026

[Message]

Clock gap between server and client is too large.

[Action by User]

Check the client PC's clock.

If the clock is correct, ask the floating license server administrator to check the server PC's clock.

E0172027

[Message]

License server respond "unknown license".

[Action by User]

The licence server version may be old.

Ask the floating license server administrator to check the version of the floating license.

E0172028

[Message]

License is out of date.

E0172040

[Message]

Failed to connect license server.

License server respond "xxx".

E0172041

[Message]

A connection with the server has timed out.

[Action by User]

Ask the floating license server administrator to check that the service is running.

E0172042

[Message]

A connection with the server could not be established.

Cannot find server or DNS error.

[Action by User]

Check [Server Address] in the option dialog box.

If this does not resolve the problem, please specify [Server Address] by the IP address.

E0172043

[Message]

Failed to connect license server.

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

If this does not resolve the problem, ask the floating license server administrator to check that the service is running.

E0172044

[Message]

A connection with the server was denied.

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

E0172045

[Message]

The server returned an error (xxx).

[Action by User]

Check [Server Address] and [Port] in the option dialog box.

E0172046

[Message]

A connection with the proxy server could not be established.

Cannot find server or DNS error.

[Action by User]

Check [Internet Option] in the control panel to bypass a proxy server.

Ask your network administrator about proxy settings.

E0172047

[Message]

A connection with the proxy server could not be established.

[Action by User]

Check [Internet Option] in the control panel to bypass a proxy server.

Ask your network administrator about proxy settings.

E0180000

[Message]

This license key is invalid.

E0180001

[Message]

"xxxxxx"

This license key is already registered.

E0180010

[Message]

Failed to add the following license.

To add an Upgrade (version) License, the license that is the source of the upgrade must be registered.

xxx

E0180011

[Message]

Failed to delete the license.

The license that is the source of the upgrade cannot be deleted before the Upgrade (version) License is deleted.

E0182000

[Message]

Could not write the license information to "xxx".

E0190000

[Message]

Failed to start License Manager.

[Action by User]

Please reinstall the CS+.

E0190001

[Message]

Failed to start License Manager.

Can not find the folder to store the license information.

[Action by User]

Please reinstall the CS+.

E0190002

[Message]

Managing the floating license server requires administrator privileges.

E0200001

[Message]

A critical error occurred.

[Explanation]

Appears when a fatal error has occurred.

[Action by User]

Please update this product.

Please install runtime components of Visual C++ 2010 x86 SP1 Libraries.

Please contact your vendor or your Renesas Electronics overseas representative.

E0200002

[Message]

Launching program program-name failed.

[Explanation]

This appears when the IDE fails to launch a Windows program.

[Action by User]

Check that the program exists and the name you have specified was that of an executable application.

E0200003

[Message]

Could not open a file with Explorer.

[Explanation]

This error occurs when the open action fails for some reason.

[Action by User]

Check the path to Explorer.

E0200004

[Message]

Could not open a file with the specified application.

[Explanation]

This appears when an application file specified in the project tree could not be opened.

[Action by User]

Make sure that an executable application was specified.

E0200005

[Message]

Clipboard setting failed.

[Explanation]

This error occurs when data could not be set in the clipboard.

[Action by User]

There may not be enough memory.

E0200006

[Message]

Can not open the help.

[Explanation]

When help is not opened, it is displayed.

[Action by User]

Please update this product.

Please contact your vendor or your Renesas Electronics overseas representative.

E0200007

[Message]

The target item cannot be moved because it is not on the same row as the destination item.

[Explanation]

This message appears when a sub-item fails to be moved within the same hierarchy level of the tree.

E0200008

[Message]

Failed to restart this product.

You may not have permission to restart.

[Explanation]

This error occurs when failing in a restart of IDE.

[Action by User]

Make sure you have access privileges to a restart of this product. The case when IDE was downloaded via a network, the case when you have no access privileges to an account, or etc..

E0200009

[Message]

Failed to launch this product.

[Explanation]

Starting up the IDE has failed.

[Action by User]

E0200010

[Message]

Failed to launch this product.

Please install version 4.5.2 or a later version of the Microsoft .NET Framework on this PC.

[Explanation]

This message appears when .NET Framework 4.5.2 or a later version is not installed on the PC.

[Action by User]

Install .NET Framework 4.5.2 or a later version on the PC.

E0201001

[Message]

Renaming failed.

[Explanation]

This error occurs when a rename fails.

[Action by User]

Make sure you have access privileges to the file before renaming it.

E0201002

[Message]

Check whether the file or folder has been set to read-only.

[Explanation]

This error occurs when the program fails to save project information.

[Action by User]

Make sure that the folder or file is not read-only.

E0201003

[Message]

Could not find the file.

[Explanation]

A file (e.g. source file) required for the build was not found.

E0201004

[Message]

Could not find the folder.

[Explanation]

This indicates that the copy destination folder was not found when packing.

[Action by User]

Make sure that the pack-destination folder is not read-only.

E0201005

[Message]

Folder creation failed.

[Explanation]

This error occurs when the program fails to create a folder.

[Action by User]

Check the access privileges to the file.

E0201006

[Message]

Reading xxx failed.

[Explanation]

This error occurs when the program fails to load a file.

[Action by User]

Check the access privileges to the file.

E0201007

[Message]

Writing xxx failed.

[Explanation]

This error occurs when the program fails to write a file

[Action by User]

Check the access privileges to the file.

E0201008

[Message]

Moving the file xxx to yyy failed.

[Explanation]

This error occurs when the program fails to move a file.

[Action by User]

Check the access privileges to the file.

E0201009

[Message]

Temporary file creation failed.

[Explanation]

This message appears when a temporary file could not be created.

[Action by User]

Check the access privileges to the file.

E0201010

[Message]

Temporary file deletion failed.

[Explanation]

This message appears when a temporary file could not be removed.

[Action by User]

Check the access privileges to the file.

E0201011

[Message]

Saving xxx failed.

[Explanation]

Failed to save file.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0201012

[Message]

Copy failed.

[Explanation]

This message appears when copy fails for some reason, such as the file already exists where it was attempted to be copied.

E0201013

[Message]

Creating the file xxx failed.

[Explanation]

This message appears when a file could not be created.

[Action by User]

Check the access privileges to the file.

E0201015

[Message]

Failed to apply save settings for the file xxx.

[Explanation]

Failed to save file settings.

[Action by User]

There could be a problem with the file contents.

E0201016

[Message]

Creating the folder xxx failed.

[Explanation]

This message appears when a folder could not be created.

[Action by User]

Check the access privileges to the folder.

E0202001

[Message]

New project creation failed.

[Explanation]

This message appears when the program fails to create a project.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0202002

[Message]

Opening a project failed.

[Explanation]

This message appears when the program fails to load a project.

[Action by User]

Follow the instructions in the message to remedy the problem.

If [Direct Error Cause] is "Cannot find product list file 'X:\...\Yyyy_ProductList.xml'.", select the check box of the microcontroller family tool that corresponds to Yyyy in the [Development Tools Selection] screen of the CS+ installer and install the tool.

E0202003

[Message]

Saving a project failed.

[Explanation]

This message appears when the program fails to save a project.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0202004

[Message]

Packing a project failed.

[Explanation]

This message appears when the program fails to pack a project.

[Action by User]

Make sure that an invalid path is not specified as the pack-destination folder.

Make sure that the pack-destination folder is not read-only.

E0202005

[Message]

The project file is broken.

[Explanation]

This error occurs when the program fails to parse a file.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202006

[Message]

This is not a convertible project file.

[Explanation]

This error occurs when attempting to open a file other than a project file that this product can handle.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202007

[Message]

The project information cannot be restored.

[Explanation]

This error occurs when the program fails to restore or convert project information. It will also occur if the program fails to extract the structure of a project to copy.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202008

[Message]

This is not a valid project file.

[Explanation]

This error occurs when the program fails to restore project information.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202009

[Message]

The specified item could not be removed from the project.

[Explanation]

This error occurs when a deletion operation fails.

[Action by User]

This item cannot be removed.

E0202010

[Message]

Subproject addition failed.

[Explanation]

This error occurs when an add operation fails.

[Action by User]

Make sure that the file exists and is not corrupt.

E0202011

[Message]

The project information is invalid.

[Explanation]

This error occurs when the program fails to parse a file.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202012

[Message]

Valid project information cannot be found.

[Explanation]

This error occurs when the program fails to restore or convert project information. It will also occur if the program fails to extract the structure of a project to copy.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202013

[Message]

The item information cannot be restored.

[Explanation]

This error occurs when the program fails to restore or convert project information. It will also occur if the program fails to extract the structure of a project to copy.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202014

[Message]

The file information cannot be restored.

[Explanation]

This error occurs when the program fails to restore or convert project information. It will also occur if the program fails to extract the structure of a project to copy.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202015

[Message]

The category information cannot be restored.

[Explanation]

This error occurs when the program fails to restore or convert project information. It will also occur if the program fails to extract the structure of a project to copy.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202016

[Message]

A subproject with the same ID has already been registered.

[Explanation]

This error occurs when attempting to add a sub-project with the same ID.

[Action by User]

It is not possible to add sub-projects with the same ID. Create a new sub-project, copying from the sub-project file you wish to add.

E0202017

[Message]

Saving build options failed.

[Explanation]

Failed to save build options to the project file.

[Action by User]

Check the version of the project file.

E0202018

[Message]

Restoring build options failed.

[Explanation]

Failed to restore build options from the project file.

[Action by User]

Check the version of the project file.

E0202019

[Message]

Saving general options failed.

[Explanation]

Failed to save common options to the project file.

[Action by User]

Check the version of the project file.

E0202020

[Message]

Restoring general options failed.

[Explanation]

Failed to restore common options from the project file.

[Action by User]

Check the version of the project file.

E0202021

[Message]

Saving compile options failed.

[Explanation]

Failed to save compile options to the project file.

[Action by User]

Check the version of the project file.

E0202022

[Message]

Restoring compile options failed.

[Explanation]

Failed to restore compile options from the project file.

[Action by User]

Check the version of the project file.

E0202023

[Message]

Saving assemble options failed.

[Explanation]

Failed to save assembly options to the project file.

[Action by User]

Check the version of the project file.

E0202024

[Message]

Restoring assemble options failed.

[Explanation]

Failed to restore assembly options from the project file.

[Action by User]

Check the version of the project file.

E0202025

[Message]

Saving link options failed.

[Explanation]

Failed to save link options to the project file.

[Action by User]

Check the version of the project file.

E0202026

[Message]

Restoring link options failed.

[Explanation]

Failed to restore link options from the project file.

[Action by User]

Check the version of the project file.

E0202027

[Message]

Saving library options failed.

[Explanation]

Failed to save library options to the project file.

[Action by User]

Check the version of the project file.

E0202028

[Message]

Restoring library options failed.

[Explanation]

Failed to restore library options from the project file.

[Action by User]

Check the version of the project file.

E0202029

[Message]

Saving object convert options failed.

[Explanation]

Failed to save object conversion options to the project file.

[Action by User]

Check the version of the project file.

E0202030

[Message]

Restoring object convert options failed.

[Explanation]

Failed to restore object conversion options from the project file.

[Action by User]

Check the version of the project file.

E0202031

[Message]

Saving compile build setting options failed.

[Explanation]

Failed to save compile build preference options to the project file.

[Action by User]

Check the version of the project file.

E0202032

[Message]

Restoring compile build setting options failed.

[Explanation]

Failed to restore compile build preference options from the project file.

[Action by User]

Check the version of the project file.

E0202033

[Message]

Setting assemble build setting options failed.

[Explanation]

Failed to restore assembly build preference options from the project file.

[Action by User]

Check the version of the project file.

E0202034

[Message]

Restoring assemble build setting options failed.

[Explanation]

Failed to restore assembly build preference options from the project file.

[Action by User]

Check the version of the project file.

E0202035

[Message]

Saving individual compile options failed.

[Explanation]

Failed to save individual compile options to the project file.

[Action by User]

Check the version of the project file.

E0202036

[Message]

Restoring individual compile options failed.

[Explanation]

Failed to restore individual compile options from the project file.

[Action by User]

Check the version of the project file.

E0202037

[Message]

Saving individual assemble options failed.

[Explanation]

Failed to save individual assembly options to the project file.

[Action by User]

Check the version of the project file.

E0202038

[Message]

Restoring individual assemble options failed.

[Explanation]

Failed to restore individual assembly options from the project file.

[Action by User]

Check the version of the project file.

E0202039

[Message]

Project manipulation is prohibited.

[Explanation]

This error occurs when trying to change the construction of the project when project actions are prohibited (in build).

[Action by User]

Wait until the current process completes.

E0202040

[Message]

Project manipulation could not be enabled.

[Explanation]

This error occurs when the program fails to remote a prohibition on project actions.

[Action by User]

Wait until the current process completes.

E0202041

[Message]

Projects and windows cannot be closed during build.

[Explanation]

This error occurs when failing to close a project.

[Action by User]

Projects cannot be closed during a build.

E0202042

[Message]

Projects and windows cannot be closed during search.

[Explanation]

This error occurs when failing to close a project.

[Action by User]

Projects cannot be closed during a search.

E0202044

[Message]

Restoring object options failed.

[Explanation]

Failed to restore object options from the project file.

[Action by User]

Check the version of the project file.

E0202045

[Message]

Saving ROMize options failed.

[Explanation]

Failed to save ROM-creation process options to the project file.

[Action by User]

Check the version of the project file.

E0202046

[Message]

Restoring ROMize options failed.

[Explanation]

Failed to restore ROM-creation process options from the project file.

[Action by User]

Check the version of the project file.

E0202047

[Message]

Saving archive options failed.

[Explanation]

Failed to save archive options to the project file.

[Action by User]

Check the version of the project file.

E0202048

[Message]

Restoring archive options failed.

[Explanation]

Failed to restore archive options from the project file.

[Action by User]

Check the version of the project file.

E0202049

[Message]

This is not a convertible PM+ project file.

[Explanation]

This error occurs when attempting to open a PM+ project (*.prj) older than version 6.00.

CS+ can only handle PM+ project format version 6.00 and above.

[Action by User]

Specify a project file which can be handled by this product to open.

E0202050

[Message]

The location specified as save destination is invalid. Specify a folder other than the project folder.

[Explanation]

The path specified as the creation location is illegal.

[Action by User]

Specify a different creation location.

E0202051

[Message]

Saving section file generate options failed.

[Explanation]

Failed to save section file generation options to the project file.

[Action by User]

Check the version of the project file.

E0202052

[Message]

Restoring section file generate options failed.

[Explanation]

Failed to restore section file generation options form the project file

[Action by User]

Check the version of the project file.

E0202053

[Message]

Saving cross reference options failed.

[Explanation]

Failed to save cross-reference options to the project file.

[Action by User]

Check the version of the project file.

E0202054

[Message]

Restoring cross reference options failed.

[Explanation]

Failed to restore cross-reference options from the project file.

[Action by User]

Check the version of the project file.

E0202055

[Message]

Saving memory layout visualization options failed.

[Explanation]

Failed to save memory layout visualization options to the project file.

[Action by User]

Check the version of the project file.

E0202056

[Message]

Restoring memory layout visualization options failed.

[Explanation]

Failed to restore memory layout visualization options from the project file.

[Action by User]

Check the version of the project file.

E0202057

[Message]

Saving dump options failed.

[Explanation]

Failed to save dump options to the project file.

[Action by User]

Check the version of the project file.

E0202058

[Message]

Restoring dump options failed.

[Explanation]

Failed to restore dump options from the project file.

[Action by User]

Check the version of the project file.

E0202059

[Message]

Saving memory bank relocation options failed.

[Explanation]

Failed to save memory bank allocation options to the project file.

[Action by User]

Check the version of the project file.

E0202060

[Message]

Restoring memory bank relocation options failed.

[Explanation]

Failed to restore memory bank allocation options from the project file.

[Action by User]

Check the version of the project file.

E0202061

[Message]

Saving variables/functions information options failed.

[Explanation]

Failed to save variable/function information options to the project file.

[Action by User]

Check the version of the project file.

E0202062

[Message]

Restoring variables/functions information options failed.

[Explanation]

Failed to restore variable/function information options from the project file.

[Action by User]

Check the version of the project file.

E0202063

[Message]

Saving link-directive setting information failed.

[Explanation]

Failed to save link directive configuration data to the project file.

[Action by User]

Check the version of the project file.

E0202064

[Message]

Restoring link-directive setting information failed.

[Explanation]

Failed to restore link directive configuration data from the project file.

[Action by User]

Check the version of the project file.

E0202065

[Message]

Upper bounds of the number of files (xxx) that is able to be registered in the project were exceeded.

[Explanation]

The maximum number of files that can be registered was exceeded while adding files to the project.

[Action by User]

Reduce the number of registered files by removing unneeded files from the project.

E0202066

[Message]

Because the format version is different, this product cannot read this project file.

[Explanation]

Tried to read the project file to which it isn't compatible.

[Action by User]

Confirm whether it's identical with tool version made created project file. When it's necessary, update integrated development environment framework and a plug-in.

E0202067

[Message]

Saving hex output options failed.

[Explanation]

Failed to save hex output options to the project file.

[Action by User]

Check the version of the project file.

E0202068

[Message]

Restoring hex output options failed.

[Explanation]

Failed to restore hex output options from the project file.

[Action by User]

Check the version of the project file.

E0202069

[Message]

Failed to import build options.

[Explanation]

This appears when importing build options fails.

[Action by User]

Check if the project file specified for import is corrupt, or if the project cannot be imported.

E0202070

[Message]

Specified project file is not supported for the build tool.

[Explanation]

The project file specified for import in the build options is not supported.

[Action by User]

Make sure that the build tool and project type are correct.

E0202071

[Message]

Upper bounds of the number of subprojects (xxx) that is able to be registered in the project were exceeded.

[Explanation]

This message appears when the maximum number of subprojects is exceeded while subprojects are being added to the project.

[Action by User]

Delete unnecessary subprojects from the project in order to reduce the total number of subprojects.

E0202072

[Message]

This is not a convertible e2 studio project file.

[Explanation]

This message appears when an attempt is made to convert the rcpc file of a non-supported version or e2 studio.

[Action by User]

Only specify projects files that can be handled by CS+.

E0202073

[Message]

The last opened project has not been found. xxx

[Explanation]

This message appears when the most recently opened project was not found (if you have made the setting for automatic loading of the most recently opened project) during the process of starting up CS+.

[Action by User]

Manually open the desired project.

E0202074

[Message]

Failed to restore settings from the file(xxx).

The file can be corrupted or opened by other process.

[Abort] : Abort launching this application.

[Retry] : Check whether it can restore settings again.

[Ignore] : Initialize settings and continue launching.

[Explanation]

When reading information for each user in the PC has failed, the full path to the target file is output to xxx.

The following may have caused loading to fail.

[Action by User]

Check that the file is not opened by another process (CS+ or editor) and is readable and writable.

If the file has not been opened by another process and the same message appears even after attempting [Retry], select [Ignore].

However, if the color settings of CS+ have been saved, the settings are initialized.

E0202075

[Message]

Failed to store settings to the file(xxx).

The file can be opened by other process or you don't have a write permission.

[Retry] : Check whether it can store settings again.

[Cancel] : Do not store settings and continue exiting.

[Explanation]

When storing information for each user in the PC has failed, the full path to the target file is output to xxx.

[Action by User]

Check that the file is not opened by another process (CS+ or editor) and is readable and writable.

E0202076

[Message]

Failed to store settings to the file(xxx).

The file can be opened by other process or you don't have a write permission.

[Retry] : Check whether it can store settings again.

[Cancel] : Do not store settings and continue processing.

[Explanation]

When storing information for each user in the PC has failed, the full path to the target file is output to xxx.

[Action by User]

Check that the file is not opened by another process (CS+ or editor) and is readable and writable.

E0203001

[Message]

An error occurred during build.

[Explanation]

This appears when an error occurred during the build.

[Action by User]

Follow the instructions in the message to remedy the problem.

If [Direct Error Cause] is "The system cannot find the file specified" and "Launching program Xxx failed.(E0200002)" is displayed as the detailed error information, check [Using compiler package version] property in the [Version Select] category on the [Common Options] tab of the build tool to confirm that the compiler of that version has been installed.

E0203002

[Message]

An error occurred during rebuild.

[Explanation]

This appears when an error occurred during the rebuild.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0203003

[Message]

An error occurred during clean.

[Explanation]

This appears when an error occurred during a clean operation.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0203004

[Message]

An error occurred while build was stopped.

[Explanation]

This appears when an error occurred stopping the build.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0203005

[Message]

Batch build failed.

[Explanation]

This message appears when an exception (not a build error) is thrown when executing a batch build from the Batch Build dialog box.

[Action by User]

Make sure that the build tool exists.

E0203006

[Message]

Batch rebuild failed.

[Explanation]

This message appears when an exception (not a build error) is thrown when executing a batch rebuild from the Batch Build dialog box.

[Action by User]

Make sure that the build tool exists.

E0203007

[Message]

Batch clean failed.

[Explanation]

This message appears when an exception (not a build error) is thrown when executing a batch clean from the Batch Build dialog box.

[Action by User]

Make sure that the build tool exists.

E0203008

[Message]

Setting build mode failed.

[Explanation]

This message appears when an error occurs in the Build Mode Settings dialog box.

[Action by User]

Make sure the input value is correct.

E0203009

[Message]

Displaying build options list failed.

[Explanation]

This message appears when the program fails to show the build options list.

[Action by User]

Make sure that the build tool is installed.

E0203010

[Message]

Updating dependency failed.

[Explanation]

This message appears when the program fails to update the file dependencies.

[Action by User]

Check the access privileges to the file.

Make sure that there are no invalid paths in the C source.

E0203011

[Message]

Setting link order failed.

[Explanation]

This message appears when the program fails to set the link order.

[Action by User]

Make sure that there are no errors in the link-order specification.

E0203012

[Message]

Assembling failed.

[Explanation]

This error occurs when a command could not be executed.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0203013

[Message]

Compiling failed.

[Explanation]

This error occurs when a command could not be executed.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0203014

[Message]

No builder has been set to the project.

[Action by User]

Make sure that the build tool is correctly installed.

E0203015

[Message]

Adding build mode failed.

[Explanation]

This message appears when an add operation fails in the Build Mode Settings dialog box.

[Action by User]

Make sure the input value is correct.

E0203016

[Message]

Changing build mode name failed.

[Explanation]

This message appears when an invalid build-mode name is entered.

[Action by User]

Make sure the input value is correct.

E0203017

[Message]

Changing current build mode failed.

[Explanation]

The specified build mode does not exist.

[Action by User]

Make sure the input value is correct.

E0203018

[Message]

Duplicating build mode failed.

[Explanation]

The specified build mode does not exist.

[Action by User]

Make sure the input value is correct.

E0203019

[Message]

Removing build mode failed.

[Explanation]

The specified build mode does not exist.

[Action by User]

Make sure the input value is correct.

E0203021

[Message]

A build mode with the same name already exists.

[Explanation]

This message appears when a build mode with the same name already exists.

[Action by User]

Make sure the input value is correct.

E0203023

[Message]

Build in progress.

[Explanation]

This error occurs when attempting to perform a build when a build is in progress.

[Action by User]

Wait until the build completes.

E0203025

[Message]

Number of include paths exceeded the maximum limit(xxx).

[Explanation]

This message appears when the number of include path settings exceeds the maximum when the build starts.

[Action by User]

Reduce the number of include paths you have added.

E0203026

[Message]

Number of library paths exceeded the maximum limit(xxx).

[Explanation]

This message appears when the number of library path settings exceeds the maximum when the build starts.

[Action by User]

Reduce the number of include paths you have added.

E0203027

[Message]

Number of library files exceeded the maximum limit(xxx).

[Explanation]

This message appears when the number of library settings exceeds the maximum when the build starts.

[Action by User]

Reduce the number of library files used.

E0203028

[Message]

Any Compiler package(xxx) using the project is not installed.

[Explanation]

This appears when there are no compiler packages installed.

[Action by User]

Make sure that the build tool is correctly installed.

E0203029

[Message]

IronPython Console Plug-in is not installed.

[Explanation]

This error occurs when the IronPython Console Plug-in could not be used.

[Action by User]

Check if the IronPython Console Plug-in has been installed and validated from the [Tool] menu -> [Plug-in Setting...].

E0203030

[Message]

Failed to apply the setting value to the build mode(xxx).

[Explanation]

This message appears when applying the option setting to the build mode has failed.

[Action by User]

Check if the setting value is correct.

E0204001

[Message]

Download failed.

[Explanation]

This error appears when an error has occurred while performing a download.

[Action by User]

Make sure that the debugging tool is connected.

Check the memory mapping.

E0205002

[Message]

Editing could not be done.

[Explanation]

This error occurs when the edit action fails for some reason.

E0205003

[Message]

Searching or replacing failed.

[Explanation]

This error occurs when the search or replace action fails for some reason.

[Action by User]

There may not be enough memory.

E0205004

[Message]

Searching or replacing xxx failed.

[Explanation]

This error occurs when the search or replace action fails for some reason.

[Action by User]

There may not be enough memory.

E0206001

[Message]

Search in progress. The next search cannot be done until the current search finishes.

[Explanation]

This message appears when attempting to perform a search while one is in progress.

[Action by User]

Cancel the search or wait until it completes.

E0207001

[Message]

Writing to memory failed.

[Explanation]

An error occurred in the debugging tool when writing data to memory.

[Action by User]

Make sure that the debugging tool is connected.

E0207002

[Message]

The specified range includes the memory area that cannot be written.

[Explanation]

This message appears when the [OK] button is clicked in the Memory Initialize dialog box.

[Action by User]

Check whether to contain the memory area that cannot be written within the specified area.

E0207003

[Message]

Failed to write the Flash Options to a debugger.

[Explanation]

This error occurs when the [Write] button is clicked in the [Flash Options Setting] dialog box.

[Action by User]

Make sure that there are no problems with the debug tool connection or settings.

E0207004

[Message]

Failed to read the Flash Options from a debugger.

[Explanation]

This occurs when the [Load] button is clicked in the [Flash Options Setting] dialog box.

[Action by User]

Make sure that there are no problems with the debugging tool connection or settings.

E0208001

[Message]

Could not remove break event.

[Explanation]

This error occurs when a breakpoint could not be removed from the Editor or Disassemble panel.

[Action by User]

Make sure that the debugging tool is connected.

E0208002

[Message]

Could not set break event.

[Explanation]

This error occurs when a breakpoint could not be set on the Editor or Disassemble panel.

[Action by User]

The setting may be invalid.

Make sure that the debugging tool is connected.

E0208003

[Message]

The file xxx was modified after it was downloaded. The settings which depends on line number, such as the event setting and PC position changes, cannot be done from this panel.

[Explanation]

This error occurs when a file was modified after downloading.

[Action by User]

Download a new built module.

E0208004

[Message]

Setting action event failed.

[Explanation]

This error occurs when setting an action event fails.

E0208005

[Message]

Trace event could not be set.

[Explanation]

This error occurs when a trace event could not be set on the Editor or Disassemble panel.

[Action by User]

The setting may be invalid.

Make sure that the debugging tool is connected.

E0208006

[Message]

Timer event could not be set.

[Explanation]

This error occurs when a timer event could not be set on the Editor or Disassemble panel.

[Action by User]

The setting may be invalid.

Make sure that the debugging tool is connected.

E0208009

[Message]

An event could not be set to the specified location.

[Explanation]

This error occurs from the [Event Setup] menu.

[Action by User]

This error occurs when there is no symbol information.

E0208010

[Message]

Event could not be disabled.

[Explanation]

This error occurs from the [Event Setup] menu.

This error occurs when there is no symbol information.

E0208011

[Message]

Event could not be removed.

[Explanation]

This error occurs from the [Event Setup] menu.

This error occurs when there is no symbol information.

E0208012

[Message]

Event could not be enabled.

[Explanation]

This error occurs from the [Event Setup] menu.

This error occurs when there is no symbol information.

E0208013

[Message]

Up to xxx action events can be set.

[Explanation]

You can register up to the number of action events shown.

[Action by User]

Delete unneeded action events.

E0209001

[Message]

Resetting program failed.

[Explanation]

This message appears when an exception is thrown while executing the [Reset] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209002

[Message]

Executing program failed.

[Explanation]

This message appears when an exception is thrown while executing the [Run] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209003

[Message]

Stopping program failed.

[Explanation]

This message appears when an exception is thrown while executing the [Stop] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209004

[Message]

Executing step-in failed.

[Explanation]

This message appears when an exception is thrown while executing the step in menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209005

[Message]

Executing step-over failed.

[Explanation]

This message appears when an exception is thrown while executing the [Step Over] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209006

[Message]

Return out failed.

[Explanation]

This message appears when an exception is thrown while executing the [Return Out] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209007

[Message]

Setting PC value failed.

[Explanation]

This message appears when an exception is thrown while executing the [Set PC Value] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209008

[Message]

Go-to-here failed.

[Explanation]

This message appears when an exception is thrown while executing the [Run to Here] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209009

[Message]

Restart failed.

[Explanation]

This message appears when an exception is thrown while executing the [Restart] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0209010

[Message]

Return-to-here failed.

[Action by User]

Make sure that the debugging tool is connected.

E0209011

[Message]

Executing a hook process failed(xxx:yyy).

[Explanation]

This message appears when a hook process executing failed.

[Action by User]

Check whether it's without errors in description of hook processing.

E0210001

[Message]

Quitting debugger failed.

[Explanation]

This message appears when an exception is thrown while executing the [Disconnect Debugger] menu command.

[Action by User]

Follow the instructions in the message to remedy the problem.

E0210002

[Message]

Launching debugger failed.

[Explanation]

This message appears when an exception is thrown while executing the [Connect to Debugger] menu command.

[Action by User]

Make sure that the debugging tool is connected.

E0210003

[Message]

Connection with a debug tool lost. Abort debugging.

[Explanation]

This error appears when the USB connection or emulator power turned off.

[Action by User]

Check the emulator power.

Check whether the USB cable isn't cut.

E0210004

[Message]

Failed to save the result of coverage for reusing.

Retry : Retry saving.

Cancel : Keep disconnection processing.

[Explanation]

This appears upon failure to save the coverage results.

[Action by User]

Check the access privileges to the file.

E0210005

[Message]

Failed to reuse the last result of coverage.

Retry : Retry reusing.

Cancel : Keep connection processing.

[Explanation]

This appears upon failure to load the coverage results.

[Action by User]

Check the access privileges to the file.

E0210006

[Message]

Disconnecting from a debug tool because the connection has timed out.

[Explanation]

This message appears when communication with the debugging tool times out.

[Action by User]

E0210007

[Message]

Failed to set data to a debug tool.

[Explanation]

This appears upon failure to set of data to a debug tool.

[Action by User]

E0210008

[Message]

Hot Plug-in is failed

[Explanation]

This message appears when a hot plug-in fails.

[Action by User]

E0210009

[Message]

Failed to download.

[Explanation]

This appears when a download has failed.

[Action by User]

E0210010

[Message]

This operation has been cancelled because not currently allowed to disconnect from the debug tool.

[Explanation]

This message appears when disconnection of the debugging tool was attempted even though this was not allowed.

[Action by User]

Stop the debugger if it is operating.

E0210011

[Message]

This operation has been cancelled because the command related to the state save feature can not use at the current product license.

[Explanation]

This message appears when saving or restoring the state and when there is no additional license related to state saving.

[Action by User]

Switch to a license which can use the state save feature.

E0210012

[Message]

Failed to load RAM or register values.

[Explanation]

This message appears when loading of RAM or register values has failed.

[Action by User]

E0210013

[Message]

Failed to save RAM or register values.

[Explanation]

This message appears when saving of RAM or register values has failed.

[Action by User]

E0210014

[Message]

Failed to save RAM or register values to the file(xxx).

[Explanation]

This message appears when saving of RAM or register values has failed.

[Action by User]

E0210015

[Message]

Failed to restore RAM or register values from the file(xxx).

[Explanation]

This message appears when restoring of RAM or register values has failed.

[Action by User]