Detail dialog box (for execution events)

This dialog box is used to display and modify detailed information on an execution-related event selected in the Events panel.

Note that the execution-related events refer to the following events in the Events panel.

-	Hardware Break event (execution type)

-	Execution-related break event in detailed information on Combination Break event [E1][E20]

-	Execution-related event as start and end condition in detailed information on Trace event

-	Execution-related event as start and end condition in detailed information on Timer Result event [IECUBE][Simulator]

Figure A.43

Detail Dialog Box (for Execution Events) [IECUBE]

Figure A.44

Detail Dialog Box (for Execution Events) [E1][E20][EZ Emulator]

Figure A.45

Detail Dialog Box (for Execution Events) [Simulator]

This section describes the following.

-	[How to open]

-	[Description of each area]

[Toolbar]

-	[Function buttons]

[How to open]

-	On the Events panel, move the caret to any one of the following events, and then select [Edit Condition...] from the context menu.

-	Hardware Break event (execution type)

-	Execution-related break event in detailed information on Combination Break event [E1][E20]

-	Execution-related event as start and end condition in detailed information on Trace event

-	Execution-related event as start and end condition in detailed information on Timer Result event [IECUBE][Simulator]

[Description of each area]

(1)	Event conditions setting area

(a)	[Address Condition]

Specify the address condition.

Compare condition [IECUBE] [Simulator]	Specify the condition to compare address.
	Default	Specified address (==)
	Modifying	Select from the drop-down list
	Available values	Specified address (==)		Specifies the address with [Address].
		Greater than or equal to (>=)
		Less than or equal to (<=)
		Inside the range (<=Values<=)		Specifies the range with [Start address] and [End address].
		Outside the range !(<=Values<=)
Address	Specify the address. [IECUBE][Simulator] This item appears only when [Specified address (==)], [Greater than or equal to (>=)] or [Less than or equal to (<=)] is selected in [Compare condition].
	Default	The current set value
	Modifying	Directly enter from the keyboard.
	Available values	Address expression within the valid range
Start address [IECUBE] [Simulator]	Specify the start address. [IECUBE][Simulator] This item appears only when [Inside the range (<=Values<=)] or [Outside the range !(<=Values<=)] is selected in [Compare condition].
	Default	The current set value
	Modifying	Directly enter from the keyboard.
	Available values	Address expression within the valid range
End address [IECUBE] [Simulator]	Specify the end address. [IECUBE][Simulator] This item appears only when [Inside the range (<=Values<=)] or [Outside the range !(<=Values<=)] is selected in [Compare condition].
	Default	The current set value
	Modifying	Directly enter from the keyboard.
	Available values	Address expression within the valid range
Use the address mask [Simulator]	Specify whether to specify an address mask.
	Default	No
	Modifying	Select from the drop-down list
	Available values	Yes	Specifies an address mask.
		No	Does not specify an address mask.
Mask value [Simulator]	Specify the value of address mask. This item appears only when [Use the address mask] is set to [Yes].
	Default	The current set value
	Modifying	Directly enter from the keyboard.
	Available values	Hexadecimal number up to five digits

(b)	[Pass Count] [IECUBE][Simulator]

Specify the pass count condition.

Pass count	Specify a pass count. The relevant event occurs when the event condition is met as many times as the specified pass count.
	Default	1
	Modifying	Directly enter from the keyboard.
	Available values	1 to 65535 in decimal number

Caution

[IECUBE]

A value other than "1" cannot be specified as the pass count condition for an execution-related event (before execution).

(2)	Description area

This area displays a simple description of the item selected in the Event conditions setting area.

[Toolbar]

		Displays all categories in the Event conditions setting area.
		Hides categories in the Event conditions setting area and rearranges only setting items in the ascending order
		This button is always invalid.

[Function buttons]

Button	Function
OK	Applies detailed settings made in this dialog box to execution-related events and closes this dialog box.
Cancel	Cancels the save and closes this dialog box.
Help	Displays the help for this dialog box.