CS+ Python function (for debug tool)

B.3.5 CS+ Python function (for debug tool)

Below is a list of CS+ Python functions (for the debug tool).

Table B.5

CS+ Python Function (For Debug Tool)

Function Name	Function Description
debugger.ActionEvent.Delete	This function deletes an action event.
debugger.ActionEvent.Disable	This function disables an action event setting.
debugger.ActionEvent.Enable	This function enables an action event setting.
debugger.ActionEvent.Get	This function references the result of the action event (Printf event).
debugger.ActionEvent.Information	This function displays action event information.
debugger.ActionEvent.Set	This function sets an action event.
debugger.Address	This function evaluates an address expression.
debugger.Assemble.Disassemble	This function performs disassembly.
debugger.Assemble.LineAssemble	This function performs line assembly.
debugger.Breakpoint.Delete	This function deletes a break point.
debugger.Breakpoint.Disable	This function disables a break point setting.
debugger.Breakpoint.Enable	This function enables a break point setting.
debugger.Breakpoint.Information	This function displays break point information.
debugger.Breakpoint.Set	This function configures a break point.
debugger.Connect	This function connects to the debug tool.
debugger.CurrentConsumption.Clear	This function clears current consumption data.
debugger.CurrentConsumption.Disable	This function disables acquiring current consumption data.
debugger.CurrentConsumption.Enable	This function enables acquiring current consumption data.
debugger.CurrentConsumption.Get	This function is used to display the maximum and average values of data on current consumption data that have been acquired.
debugger.CurrentConsumption.Information	This function displays information on acquiring current consumption data.
debugger.DebugTool.Change	This function changes the debug tool.
debugger.DebugTool.GetType	This function displays information about the debug tool.
debugger.DebugTool.RestoreState	This function restores the state of the debug tool to the one saved in the file.
debugger.DebugTool.SaveState	This function saves the state of the debug tool to a file.
debugger.Disconnect	This function disconnects from the debug tool.
debugger.Download.Binary	This function downloads a binary file.
debugger.Download.Binary64Kb	This function downloads a binary file in within-64 KB format.
debugger.Download.BinaryBank	This function downloads a binary file in memory bank format.
debugger.Download.Coverage	This function downloads coverage data.
debugger.Download.Hex	This function downloads a hex file.
debugger.Download.Hex64Kb	This function downloads a hex file in within-64 KB format.
debugger.Download.HexBank	This function downloads a hex file in memory bank format.
debugger.Download.HexIdTag	This function downloads a hex file with ID tag.
debugger.Download.Information	This function displays download information.
debugger.Download.LoadModule	This function downloads a load module.
debugger.Erase	This function erases the Flash memory.
debugger.GetBreakStatus	This function displays a break condition.
debugger.GetCpuStatus	This function displays the current CPU status.
debugger.GetIeStatus	This function displays the current IE status.
debugger.GetIORList	This function displays a list of the IORs and SFRs.
debugger.GetPC	This function displays the PC value.
debugger.GetProcesserElementNames	This function displays a list of the PE names of multiple cores.
debugger.Go	This function continues program execution.
debugger.Ie.GetValue debugger.Ie.SetValue	This function sets or refers to the IE register or DCU register.
debugger.Interrupt.DeleteTimer	This function deletes the timer interrupt setting.
debugger.Interrupt.Notification	This function sets exception cause codes whose notification is accepted.
debugger.Interrupt.OccurEI	This function generates EI-level interrupts.
debugger.Interrupt.OccurFE	This function generates FE-level interrupts.
debugger.Interrupt.ReferTimer	This function displays the timer interrupt setting information.
debugger.Interrupt.RequestEI	This function sends an EI-level interrupt request to the interrupt controller.
debugger.Interrupt.RequestFE	This function sends an FE-level interrupt request to the interrupt controller.
debugger.Interrupt.RequestFENMI	This function sends an NMI request to the interrupt controller.
debugger.Interrupt.SetTimer	This function sets the timer interrupt.
debugger.IsConnected	This function checks the connection status of the debug tool.
debugger.IsRunning	This function checks the execution status of the debug tool.
debugger.Jump.File debugger.Jump.Address	This function displays each panel.
debugger.Map.Clear	This function clears the mapping settings.
debugger.Map.Information	This function displays map information.
debugger.Map.Set	This function configures memory mapping.
debugger.Memory.Copy	This function copies the memory.
debugger.Memory.Fill	This function fills the memory.
debugger.Memory.Read	This function refers to the memory.
debugger.Memory.ReadRange	This function refers to the specified number of locations in memory.
debugger.Memory.Write	This function writes to the memory.
debugger.Memory.WriteRange	This function writes multiple data to the memory.
debugger.Next	This function performs procedure step execution.
debugger.Performance.Delete	This function deletes a condition of performance measurement.
debugger.Performance.Disable	This function disables performance measurement.
debugger.Performance.Enable	This function enables performance measurement.
debugger.Performance.Get	This function references the result of performance measurement.
debugger.Performance.Information	This function displays performance measurement information.
debugger.Performance.Set	This function sets performance measurement.
debugger.PseudoError.Clear	This function clears the error status of all pseudo-errors.
debugger.PseudoError.Get	This function references ECM error information.
debugger.PseudoError.SetGo	This function sets conditions of a pseudo-error and runs a program.
debugger.RecoverSWAS	This function recovers the Switch Area Status.
debugger.Register.GetValue	This function refers to register/IO register/SFR.
debugger.Register.SetValue	This function sets the value of a register/IO register/SFR.
debugger.Reset	This function resets the CPU.
debugger.ReturnOut	This function runs until control returns to the program that called the current function.
debugger.Run	This function resets and then run the program.
debugger.SaveRegisterBank.Information	This function displays information on the save register bank.
debugger.SoftwareTrace.Delete	This function deletes a software trace.
debugger.SoftwareTrace.Disable	This function disables a software trace.
debugger.SoftwareTrace.Enable	This function enables a software trace.
debugger.SoftwareTrace.Get	This function refers to the software trace data for the specified number of frames. This function also outputs the acquired software trace data to a file.
debugger.SoftwareTrace.Information	This function displays software trace information.
debugger.SoftwareTrace.Set	This function sets a software trace.
debugger.SoftwareTraceLPD.Delete	This function deletes a software trace (LPD output).
debugger.SoftwareTraceLPD.Disable	This function disables a software trace (LPD output).
debugger.SoftwareTraceLPD.Enable	This function enables a software trace (LPD output).
debugger.SoftwareTraceLPD.Get	This function refers to the software trace (LPD output) data for the specified number of frames. This function also outputs the acquired software trace (LPD output) data to a file.
debugger.SoftwareTraceLPD.Information	This function displays software trace (LPD output) information.
debugger.SoftwareTraceLPD.Set	This function sets a software trace (LPD output).
debugger.Step	This function performs step execution.
debugger.Stop	This function stops the execution of the debug tool.
debugger.Timer.Clear	This function clears the result measured by a conditional timer.
debugger.Timer.Delete	This function deletes a conditional timer.
debugger.Timer.Detail	This function sets measurement conditions of a conditional timer.
debugger.Timer.Disable	This function disables a conditional timer.
debugger.Timer.Enable	This function enables a conditional timer.
debugger.Timer.Get	This function references the result measured by a conditional timer.
debugger.Timer.Information	This function displays conditional timer information.
debugger.Timer.Set	This function sets a conditional timer.
debugger.Trace.Clear	This function clears the trace memory.
debugger.Trace.Delete	This function deletes a conditional trace.
debugger.Trace.Disable	This function disables a conditional trace.
debugger.Trace.Enable	This function enables a conditional trace.
debugger.Trace.Get	This function dumps the trace data.
debugger.Trace.Information	This function displays conditional trace information.
debugger.Trace.Set	This function sets a conditional trace.
debugger.Upload.Binary	This function saves the memory data in binary format.
debugger.Upload.Coverage	This function saves the coverage data.
debugger.Upload.Intel	This function saves the memory data in Intel format.
debugger.Upload.Motorola	This function saves the memory data in Motorola format.
debugger.Watch.GetValue	This function refers to a variable value.
debugger.Watch.SetValue	This function sets a variable value.
debugger.Where	This function displays a stack backtrace.
debugger.Whereami	This function displays a location.
debugger.XCoverage.Clear	This function clears the coverage memory.
debugger.XCoverage.GetCoverage	This function gets the coverage.
debugger.XRunBreak.Delete	This function deletes XRunBreak setting information.
debugger.XRunBreak.Refer	This function displays XRunBreak setting information.
debugger.XRunBreak.Set	This function configures XRunBreak settings.
debugger.XTime	This function displays timing information between Go and Break.
debugger.XTrace.Clear	This function clears the trace memory.
debugger.XTrace.Dump	This function dumps the trace data.
TraceInfo.CreateOtherDict	This function converts the value of TraceInfo.Other into the dict type.